FIRELITE® Transport Skid Unit
Darley or Davey Pump - Poly Water Tank / Hannay Reel & Rescue Area
Built to last and easy to use, our FIRELITE® Transport FDHP-303-200 skid unit is made for budget minded departments looking to add a brush truck to their fleet of apparatus. This capable, no nonsense wildland firefighting slip on skid unit will get the job done on road or off road. It is set up to be low profile and has a low center of gravity. The FDHP also has a rescue capability to carry a patient for off road rescue situations. The 200 gallon skid unit is special built to fit into most 8 foot long cargo boxes on full size pickup trucks or on a flatbed body. Tank is fully baffled according to NFPA standards. This unit comes complete with an electric rewind Hannay 4000 series reel and Scotty Through-the-Pump class A foam system with 5 gallon foam cell! The FIRELITE will surely fulfill your brush truck fire apparatus needs. Be sure to check out the options page for more customization of your FIRELITE FDHP skid unit!
PRICES START AT $9,700.00 + SHIPPING
UNIT SHIPS FULLY ASSEMBLED - CALL FOR WEIGHT AND DIMENSION DETAILS
All truck unit base pricing includes Hannay 4000 series reel with electric rewind and Scotty Through-the-Pump Class A Foam System with integrated 5 gallon foam tank!
Add rear attack line tray (dead lay) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.
Add a 4’ rear attack line tray (pre-connect) to hold booster line and one open toolbox holder to carry long tools with holder for long board on passenger side of skid unit.
*Optional high roller also shown
Add custom built rear attack line tray (pre-connect) the length of the skid unit to hold approximately 150’ of 1.5” line. Second rear attack line tray (dead lay) length of the bed to hold approximately 150’ of 2.5” line.
Add rear attack line tray (pre-connect) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.
Add lower roller off driver’s side of truck, high roller off passenger side.
Increase length of hose to 100’ of 1” or 150’ of ¾” (requires larger reel at additional cost)
**Dead lay or pre-connect available for area adjacent to pump only.