Skid Units for Brush Trucks (125 Gallon Tank) | Pick-Up Truck Mounted Fire Rescue Vehicle

FIRELITE^® Transport Skid Unit
Darley-Davey Pump - Poly Water Tank / Hannay Reel & Rescue Area
(#FDHP-301-125)

Built to last and easy to use, our FIRELITE® Transport FDHP-301-125 skid unit is made for budget minded departments looking to add a low cost brush truck to their fleet of apparatus. This capable, no nonsense wildland firefighting slip on skid unit will get the job done on road or off road. It is set up to be low profile and has a low center of gravity. The FDHP also has a rescue capability to carry a patient for off road rescue situations. The 125 gallon skid unit is special built to fit into most short or long bed cargo boxes on full size pickup trucks or on a flatbed body. Tank is fully baffled according to NFPA standards. This unit comes complete with an electric rewind Hannay 4000 series reel and Scotty Through-the-Pump class A foam system with 5 gallon foam cell! The FIRELITE will surely fulfill your brush truck fire apparatus needs. Be sure to check out the options page for more customization of your FIRELITE FDHP skid unit!

PRICE STARTS AT $8,600.00 + SHIPPING
UNIT SHIPS FULLY ASSEMBLED
SEE SPECIFICATION SHEET ABOVE FOR WEIGHT AND DIMENSION DETAILS

All truck unit base pricing includes Hannay 4000 series reel with electric rewind and
Scotty Through-the-Pump Class A Foam System with integrated 5 gallon foam tank!
Call us toll free at: 1-888-546-8358 or email: sales@kimtekresearch.com

All aluminum construction with bright aluminum diamond plate and aluminum tubing sub-frame
Hose bed storage section with tail gate for storing hard suction, forestry hose, nozzles etc
Features all stainless steel piping and 1/4 turn brass valves
Units comes complete with the Darley-Davey® Two Stage High Pressure Pump: Twin impeller, gas driven Honda engine pump powered by a manual recoil 5.5 HP or an electric start 9 & 13 HP able to self prime to 19'; Nitrile rubber seal & casing "O" rings; Low oil protection; One Year Pump Warranty; Two Year Engine Warranty
Comes with 2 gated 1-1/2" discharges 1 to side 1 to rear; 1 gated 1" pump to tank refill; 1 gated 1" to booster reel; 1 gated 1-1/2" auxiliary suction; 1 gated 1-1/2" tank to pump - all NST threads
Available 6.5, 9, 13 HP Darley-Davey Pump
- 6.5 HP pump flows: 65 GPM @ 48 PSI, 50 GPM @ 81 PSI, 20 GPM @ 120 PSI
- 9 HP pump flows: 120 GPM @ 36 PSI, 95 GPM @ 83 PSI, 60 GPM @ 118 PSI, 20 GPM @ 144 PSI
- 13 HP pump flows: 120 GPM @ 40 PSI, 95 GPM @ 108 PSI, 60 GPM @ 133 PSI, 20 GPM @ 146 PSI
125 gallon poly water tank with integrated 5 gallon foam cell and baffles - limited lifetime warranty
5 gallon foam cell
Pre-connected F4000 Series Hannay Electric Reel® with 100' of 3/4" or 50' of 1" Boostlite Hose with wildland adjustable fog nozzle
Scotty Through-the-Pump Class A Foam System
Integrated water tank sight gauges; 1 for water, 1 for foam
2- 48" x 1" stainless steel grab rails at rescue area for mounting a stokes basket or long board
10- 24" long Velcro D Loop Straps Included
Adapter to refill water back packs in the field without starting pump
Reinforced skid plate bottom for fork lifts
Mercedes Draftlite Kit – includes Hydro-Wick Hand Primer installed on skid; 20’ of 1.5” suction hose; Foot Valve / Strainer

Cross lay tray, dead lay, on pickup truck skid unit

Add cross lay tray (dead lay) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.

Cross lay tray, pre-connect, on pickup truck skid unit

Add a 4’ cross lay tray (pre-connect) to hold booster line and one open toolbox holder to carry long tools with holder for long board on passenger side of skid unit.
*Optional high roller also shown

Cross lay tray, custom built, on pickup truck skid unit

Add custom built cross lay tray (pre-connect) the length of the skid unit to hold approximately 150’ of 1.5” line. Second cross lay tray (dead lay) length of the bed to hold approximately 150’ of 2.5” line.

Add cross lay tray (pre-connect) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.