Made In USA

BUY FACTORY DIRECT

Credit Cards Accepted
326 Industrial Park Lane
Orleans, VT
888 546-8358
326 Industrial Park Lane, Orleans, VT
888 546-8358
FDHP-302-160

FIRELITE® Transport Skid Unit
Darley-Davey Pump - Poly Water Tank / Hannay Reel & Rescue Area

(#FDHP-302-160)

Built to last and easy to use, our FIRELITE® Transport FDHP-302-160 skid unit is made for budget minded departments looking to add a brush truck to their fleet of apparatus. This capable, no nonsense wildland firefighting slip on skid unit will get the job done on road or off road. It is set up to be low profile and has a low center of gravity. The FDHP also has a rescue capability to carry a patient for off road rescue situations. The 160 gallon skid unit is special built to fit into most short or long bed cargo boxes on full size pickup trucks or on a flatbed body. Tank is fully baffled according to NFPA standards. This unit comes complete with an electric rewind Hannay 4000 series reel and Scotty Around the Pump class A foam system with 5 gallon foam cell! The FIRELITE will surely fulfill your brush truck fire apparatus needs. Be sure to check out the options page for more customization of your FIRELITE FDHP skid unit!

PRICES START AT $8,900.00 + SHIPPING
UNIT SHIPS FULLY ASSEMBLED - CALL FOR WEIGHT AND DIMENSION DETAILS

All truck unit base pricing includes Hannay 4000 series reel with electric rewind and Scotty Around the Pump Class A Foam System with integrated 5 gallon foam tank!

Fire Skid Unit for Truck
Fire Skid Unit for Truck
  • All aluminum construction with bright aluminum diamond plate and aluminum tubing sub-frame
  • Hose bed storage section with tail gate for storing hard suction, forestry hose, nozzles etc
  • Features all stainless steel piping and 1/4 turn brass valves
  • Units comes complete with the Darley-Davey® Two Stage High Pressure Pump: Twin impeller, gas driven Honda engine pump powered by a manual recoil 5.5 HP or an electric start 9 & 13 HP able to self prime to 19'; Nitrile rubber seal & casing "O" rings; Low oil protection; One Year Pump Warranty; Two Year Engine Warranty
  • Comes with 2 gated 1-1/2" discharges 1 to side 1 to rear; 1 gated 1" pump to tank refill; 1 gated 1" to booster reel; 1 gated 1-1/2" auxiliary suction; 1 gated 1-1/2" tank to pump - all NST threads
  • Available 5.5, 9, 13 HP Darley-Davey Pump
    • 5.5 HP pump flows: 50 GPM @ 68 PSI, 30 GPM @ 97 PSI, 15 GPM @ 112 PSI
    • 9 HP pump flows: 120 GPM @ 36 PSI, 95 GPM @ 83 PSI, 60 GPM @ 118 PSI, 20 GPM @ 144 PSI
    • 13 HP pump flows: 120 GPM @ 40 PSI, 95 GPM @ 108 PSI, 60 GPM @ 133 PSI, 20 GPM @ 146 PSI
  • 160 gallon poly water tank with integrated 5 gallon foam cell and baffles - limited lifetime warranty
  • 5 gallon foam cell
  • Pre-connected F4000 Series Hannay Electric Reel® with 100' of 3/4" or 50' of 1" Boostlite Hose with wildland adjustable fog nozzle
  • Scotty Around the Pump Class A Foam System
  • Integrated water tank sight gauges; 1 for water, 1 for foam
  • 2- 48" x 1" stainless steel grab rails at rescue area for mounting a stokes basket or long board
  • 10- 24" long Velcro D Loop Straps Included
  • Adapter to refill water back packs in the field without starting pump
  • Reinforced skid plate bottom for fork lifts
  • Mercedes Draftlite Kit – includes Hydro-Wick Hand Primer installed on skid; 20’ of 1.5” suction hose; Foot Valve / Strainer
Cross lay tray, dead lay, on pickup truck skid unit

Add cross lay tray (dead lay) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.

Cross lay tray, pre-connect, on pickup truck skid unit

Add a 4’ cross lay tray (pre-connect) to hold booster line and one open toolbox holder to carry long tools with holder for long board on passenger side of skid unit.
*Optional high roller also shown

Cross lay tray, custom built, on pickup truck skid unit

Add custom built cross lay tray (pre-connect) the length of the skid unit to hold approximately 150’ of 1.5” line. Second cross lay tray (dead lay) length of the bed to hold approximately 150’ of 2.5” line.

Cross lay tray, pre-connect, on pickup truck skid unit

Add cross lay tray (pre-connect) to hold approximately 150’ of 1.5” line for the length of the unit. One long tool holder box length of skid unit with a full length door opening to the side of the unit (off passenger side) for easy access.

Roller offs, on pickup truck skid unit

Add lower roller off driver’s side of truck, high roller off passenger side.

Other options include:

Increase length of hose to 100’ of 1” or 150’ of ¾” (requires larger reel at additional cost)

**Dead lay or pre-connect available for area adjacent to pump only.

 
Made In USA
BUY FACTORY DIRECT
Credit Cards Accepted
Medlite Medical Rescue Logo
Firelite Logo
Darley
Hannay Reels
Scotty
Integra Plastic Products
Pacer
GSA Advantage
International Association of Wildland Fire
FEMSA
FAMA
Kimtek 31 Years Logo
Kimtek Corporation BBB Business Review